关于意普

First, to confirm whether it is an old-fashioned punch? Have you modified it?

Old punch: The safety grating can not directly control the old punch connecting rod gear, at this time, you need to be converted into an electromagnet or cylinder type to achieve the control punch, after the sweep stop, but also automatically resume work, no longer need to manually start the punch.

1. If not, then we will directly install the safety grating;

2. If yes, it can also be directly installed with safety grating after modification;

3. If it is, it has not been modified, then we must first modify the press in advance.

Second, to confirm the tonnage of the press

After confirming the tonnage of the press, confirm the protection height of the safety grating to be installed and see which model needs to be installed.

Third, in the installation of the safety grating bracket

ESPE safety grating according to the appearance of the press to see the appropriate installation of which bracket, can also be specially customized bracket.

Four, equipped with safety grating sensor

The sensor is the transmitter and receiver of the safety grating. Install the safety grating sensor after mounting with the support.

Five, install the controller

The controller is divided into internal and external, the effect is the same.

1. The built-in controller needs to be installed in the punching machine electric box;

2. The external is generally installed on the side wall of the punching machine.

Six, debugging press

After the installation of the safety grating, it is necessary to debug the punch to see whether the installation is successful, and after repeated debugging, workers can be allowed to operate production operations.